| Customization: | Available |
|---|---|
| Feature: | Oxidative Degradable |
| CAS No.: | HDPE |
|
Still deciding? Get samples of US$ 100/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Name: High Density Polyethylene
HDPE is a highly crystalline non-polar thermoplastic resin formed by copolymerization of ethylene and a small
amount of A-olefin monomers. High density polyethylene is synthesized at low pressure, so it is also called low
pressure polyethylene. HDPE is mainly linear molecular structure with few branches. High crystallinity and density.
It can withstand high temperature and has good rigidity and mechanical strength and resistance to chemical corrosion.
The full range of HDPE products produced by covers all applications of HDPE, including film, blow molding,
extrusion molding, injection molding, piping, wire and cable, and production of chlorinated polyethylene substrates.
Specification of HDPE:
|
Grades
|
HDPE 049
|
HDPE-100
|
HDPE-80
|
HDPE-6081H
|
HDPE-3000JE
|
|
(5.0kg,190ºC)Melt mass-flow rate,g/10min
|
0.26
|
0.26
|
0.430
|
6.22
|
2.2
|
|
Density,g/cm³
|
0.95
|
0.95
|
0.9458
|
0.9577
|
0.956
|
|
Tensile stress at yield,Mpa
|
23.3
|
23.3
|
21.3
|
26.1
|
24.8
|
|
Modulus of elasticity in tension,Mpa
|
882
|
882
|
-
|
-
|
-
|
|
Flexural modulus,Mpa
|
1047
|
1047
|
955
|
1057
|
1020
|
|
23ºC Charpy impact strength,KJ/m²
|
37.8
|
37.8
|
11.8H
|
4.2
|
12
|
|
Temperature of deflection under load(Tf0.45),ºC
|
77
|
77
|
-
|
-
|
68
|
|
Water content,mg/kg
|
14
|
14
|
58
|
-
|
-
|
|
Volatile content,mg/kg
|
213
|
213
|
112
|
-
|
-
|
|
0xidation induction time(0IT,210ºC),min
|
78.3
|
78.3
|
28.9
|
-
|
-
|
|
Nominal tensile strain at break,%
|
560
|
560
|
298
|
661
|
9.6
|
|
Application
|
drain pipe
|
drain pipe
|
Water pipe
|
Injection bottle cap
|
Injection bottle cap
|
HDPE is suitable for many plastic molding methods. Blow molding can be used to make various types of bottles,
cans and industrial cans, drums. Injection molding is used to make various containers and daily necessities, such
as POTS, buckets, baskets, furniture and so on. Extrusion molding is used to manufacture pipe, tape, fiber,
monofilament, also can be used to manufacture wire and cable coating material and synthetic paper. HDPE can
also be used as an alternative to wood and cardboard in calcium-plastic packaging containers, furniture, doors
and Windows with the addition of a large amount of inorganic filler.
Packed in 25kg bag or 1100kg jumbo bag.
also be packed according to customer's needs.
Store closed containers in a cool, dry, well-ventilated area. Avoid exposure to direct sunlight.
){kind=link}